Octane2, Dual-R14K/600Mhz (2MB), 512MB RAM, V12, IRIX 6.5.30m.

Tested: 23/May/2025

NOTE: DECOUPLE_SWAPBUF is set active, which can sometimes give a
small extra boost to 3D performance, about 2% at most.

Location: /hw/node
      PM20600MHZ Board: barcode MME781     part 030-1778-001 rev  C
Location: /hw/node/xtalk/15
            IP30 Board: barcode KES045     part 030-1467-001 rev  D
Location: /hw/node/xtalk/15/pci/2
             FP1 Board: barcode KBB745     part 030-0891-003 rev  G
    PWR.SPPLY.ER Board: barcode AAE0340061 part 060-0035-002 rev  A
Location: /hw/node/xtalk/11
  ODY128VERSIONB Board: barcode KWG989     part 030-1611-001 rev  C
2 600 MHZ IP30 Processors
Heart ASIC: Revision F
CPU: MIPS R14000 Processor Chip Revision: 2.4
FPU: MIPS R14010 Floating Point Chip Revision: 0.0
Main memory size: 512 Mbytes
Xbow ASIC: Revision 1.4
Instruction cache size: 32 Kbytes
Data cache size: 32 Kbytes
Secondary unified instruction/data cache size: 2 Mbytes
Integral SCSI controller 0: Version QL1040B (rev. 2), single ended
  Disk drive: unit 1 on SCSI controller 0 (unit 1)
Integral SCSI controller 1: Version QL1040B (rev. 2), single ended
IOC3/IOC4 serial port: tty1
IOC3/IOC4 serial port: tty2
IOC3 parallel port: plp1
Graphics board: V12
Integral Fast Ethernet: ef0, version 1, pci 2
Iris Audio Processor: version RAD revision 12.0, number 1
  PCI Adapter ID (vendor 0x10a9, device 0x0003) PCI slot 2
  PCI Adapter ID (vendor 0x1077, device 0x1020) PCI slot 0
  PCI Adapter ID (vendor 0x1077, device 0x1020) PCI slot 1
  PCI Adapter ID (vendor 0x10a9, device 0x0005) PCI slot 3

Graphics board 0 is "ODYSSEY" graphics.
        Managed (":0.0") 1280x1024 
        BUZZ version B.1
        PB&J version 1
        128MB memory
                Banks: 4, CAS latency: 3
         Monitor 0 type: Unknown
        Channel 0:
         Origin = (0,0)
         Video Output: 1280 pixels, 1024 lines, 60.00Hz (1280x1024_60)