Indigo2 R10K/200 (1MB), MaxIMPACT/TRAM, 768MB (2 banks),
Seagate ST336753LC, 6.5.22m.

The CPU is a core swap from a bad 195 module, moved into what
was a 175 module, resistors moved to select a 4x multiplier,
giving 200MHz based on the 50MHz crystal.

Tested on 24/Mar/2026.

FPU: MIPS R10010 Floating Point Chip Revision: 0.0
CPU: MIPS R10000 Processor Chip Revision: 2.6
1 200 MHZ IP28 Processor
Main memory size: 768 Mbytes
Secondary unified instruction/data cache size: 1 Mbyte
Instruction cache size: 32 Kbytes
Data cache size: 32 Kbytes
Integral SCSI controller 0: Version WD33C93B, revision D
  Disk drive: unit 1 on SCSI controller 0 (unit 1)
Integral SCSI controller 1: Version WD33C93B, revision D
On-board serial ports: 2
On-board bi-directional parallel port
Graphics board: Maximum Impact/TRAM option card
Integral Ethernet: ec0, version 1
Iris Audio Processor: version A2 revision 1.1.0
EISA bus: adapter 0

Graphics board 0 is "IMPACTPC" graphics.
        Managed (":0.0") 1280x1024 
        Product ID 0x0, 2 GEs, 2 REs, 4 TRAMs
        MGRAS revision 3, RA revision 5, RB revision 4
        HQ rev A, GE11 rev B, RE4 rev A, PP1 rev A, 
        VC3 rev A, CMAP rev EMC rev D
        21" monitor (id 0xb)

        Channel 0:
         Origin = (0,0)
         Video Output: 1280 pixels, 1024 lines, 60.00Hz (1280x1024_60)